Repeater Information

Transmitter (Output) Frequency: 441.700 MHz

Receiver (Input) Frequency: 446.700 MHz

CTCSS Tone: 77.0 Hz

Repeater System Location Information

Location in: Milford, Connecticut (New Haven County)

41.225 North Latitude
73.060 West Longitude

Repeater Antenna System Information

Height Above Sea Level (HASL): 435 FEET

Height Above Average Terrain (HAAT): 305 FEET

Height Above Ground Level (HAGL): 130 FEET

Repeater Antenna Type: Celwave Super Station Master (w/ 10 db. Gain)

Repeater Antenna RF Feed line: 135 Feet of (1 7/8" inch) Commercial Hard line

Repeater Remote Base Link Antenna: NCG/Comet Tribander (2m/220/440)

Repeater System Hardware Information

Repeater Transmitter/Receiver: Kenwood TKR-850 Commercial Repeater

Repeater Controller: Link-Comm Model RLC-3 Deluxe Controller

Repeater Duplexers: Wacom (4-Cavity) Rack Mount

Repeater Amplifier: Henry 200 Watt Continuous Duty Repeater Amplifier

Band Pass Filter: TX/RX Systems 3db. Band pass Cavity

Repeater Receiver Preamplifier: TX/RX Systems 16db. Gain Pre-Amplifier

Repeater Power Supply: Samlex Model SEC-100BRM 100amp Rack Mount Power Supply

Remote Base System: Doug Hall Model RBI-1 Remote Base System and
Kenwood TM-241A, TM-331A & TM-441A Link Radios
(Remote Links to 144/220/440 MHz Bands)

 

Dedicated Links System: Diamond 2-Meter/220 MHz Dual Band Base Antenna System. Connected with a Kenwood TM-241A 2 Meter Link Radio & a Kenwood TM-331A 220 MHz Link Radio. Used to set up Dedicated Links to Repeaters listed below.

 

Dedicated Remote Links: 146.445 MHz WK1M Repeater (PL-Tone: 77.0Hz) in Bridgeport, Connecticut. 224.960 MHz N1LXV Repeater (PL-Tone: 77.0Hz) also in Bridgeport, Connecticut.

(2-Meter, 220MHz & 440MHz Tri-Band Repeater Link System)

Repeater RF Jumper Cables: 1/2" inch SuperFlex Hard line Jumper Cables
 

Owners and Control Ops

N1KGN - Owner

N1KGM - Owner/Control Op

N1PLH - Owner/Control OP

NY1M - Control Op